Bulk Material Handling Systems Products Spares

• Slow Moving Chains allow material to flow either horizontal, vertical or at steepy inclined positions.
• Cost advantages due to low power consumption, compact size & low maintenance requirements.
• Available in different width and length as per requirement
• Can Handle any type of bulk material viz,Flyash, Burnt lime, coal reject, slag dust,etc

• Supply of horizontal conveyor, inclined conveyors, submerged conveyor, portable conveyor.
• Capacity range of 1 TPH- 150 TPH over a distance of up to 80 mtrs.
• Standards used –IS -891(PART-1), IS-2062, IS-11592 & other relevant IS codes.
• Can also supply spares of belt conveyors as per customer’s specifications -rollers, pulleys,sprockets,scrappers, guide rollers, skirt board, Pull cord, Safety switches, etc.

• Are capable of conveying material over large distances.
• Operate on the principal of fluidizing the base of raw materials layer by means of providing pressurized dry air through permeable synthetic cloth.
• Sizes available are from 150 mm to 840 mm.
• These come along with Junction boxes & discharge spout accompanies air slide

• Are capable of conveying material over large distances.
• Operate on the principal of fluidizing the base of raw materials layer by means of providing pressurized dry air through permeable synthetic cloth.
• Sizes available are from 150 mm to 840 mm.
• These come along with Junction boxes & discharge spout accompanies air slide

• Good quality air locks are required for dust filtration in cyclones and bag filter applications.
• Main function is to regulate the flow of material from one chamber to other maintaining air lock conditions.
• Available in sizes: 150, 200, 250, 300,350,400,500 to 900 mm dia with round or square openings.
• Larger sizes can be manufactured as per requirement.

• Apron feeders are used to extract or feed large, lumpy, abrasive and heavy ores under severe impact conditions - including wet, sticky or frozen operations.
• A robust, heavy duty design provides minimal downtime and many years of service life.
• Prevents choking of materials feeding crusher or other equipment.
• Reclaims material at a uniform rate from hoppers, bin and stockpile.

• Apron feeders are used to extract or feed large, lumpy, abrasive and heavy ores under severe impact conditions - including wet, sticky or frozen operations.
• A robust, heavy duty design provides minimal downtime and many years of service life.
• Prevents choking of materials feeding crusher or other equipment.
• Reclaims material at a uniform rate from hoppers, bin and stockpile.

Screw conveyor are used for positive displacement/handling of free flowing as well as lumpy materials over a distance.
We make u trough type or enclosed tube type screw conveyors as per requirement of process. 

We are one of the renowned manufacturers and suppliers of Engineering Products. Our wide range of product includes Filter Bag, Centrifugal Blower and Cabinet Blower. These are manufactured using superior quality raw material such as iron, aluminum, brass and steel to assure quality and durable range of products. Our range is in high demand due to sturdy construction, high performance and long functional life.
Bulk Material Handling

• Trough or enclosed tube type screw conveyors.
• Can be supplied for horizontal, incline or vertical operation.
• Standard material of manufacture is mild steel but units can also be supplied in stainless steel (SS 202, SS 304, SS 316).
• Sizes as small as 50mm diameter and 600mm diameter as per requirement with total length up to 40 meters.

• Screw sampler is designed for sample extraction of dry and non-sticky powdered material from a duct or chute through which free flow of material is taking place.

• Are the most important screening machines primarily utilised in the mineral processing industry.
• They are used to separate feeds containing solid and crushed ores down to approximately 200μm in size, and are applicable to both perfectly wetted and dried feed.
• The high frequency vibrating screens usually operates at an inclined angle, traditionally varying between 0 to 25 degrees and can go up to a maximum of 45 degrees.
• Operate at a low stroke and has a frequency ranging from 1500 - 7200 RPM.

Having vast industry experience in this domain as a reliable organization, we are providing Bag Filter. Demanded for air filtering applications, these filters are manufactured under the guidance of experts, who are well-versed in this domain. More to this, these filters are checked on various parameters to ensure defect-free filters.

Features:

• Excellent functionality
• Long functional life
• Hassle free performance
• Sturdiness

Specifications:

• One of the most versatile collectors for the removal of dry suspended particulate matter (SPM) from air or gas stream in which the dust bearing gas is passed unidirectional through a fabric filter medium
• The unit can trap dust particles as small as 0.5 micron. Its capacity ranges from 1000 m3/hr to 2,00,000 m3/hr
• The company is striving to save the uniqueness of the planet earth from the clutches of environmental pollution. Since inception, it has targeted the purification objective by providing innovative turnkey solutions in the areas of pollution control and air ventilation
• The company is committed towards quality in its manufacturing activity in accordance
• With the advanced CAD capability, structural design, STAAD technology and standards, it provides success designing, building, and servicing air pollution and air handling systems and equipments

We are one of the renowned manufacturers and suppliers of Engineering Products. Our wide range of product includes Filter Bag, Centrifugal Blower and Cabinet Blower. These are manufactured using superior quality raw material such as iron, aluminum, brass and steel to assure quality and durable range of products. Our range is in high demand due to sturdy construction, high performance and long functional life.

We are one of the renowned manufacturers and suppliers of Engineering Products. Our wide range of product includes Filter Bag, Centrifugal Blower and Cabinet Blower. These are manufactured using superior quality raw material such as iron, aluminum, brass and steel to assure quality and durable range of products. Our range is in high demand due to sturdy construction, high performance and long functional life.